New products from www.newequipment.com and New Equipment Digest: Materials/Compounds

Master Bond Inc. : Corrosion-Resistant Epoxy Resin Coating

Mon, 27 Aug 2007 07:18:00 GMT

Master Bond has developed a new two component adhesive system called EP41-lND. The epoxy resin system is a solvent free composition which cures readily at ambient temperatures to produce durable, hard, tough and extremely corrosion resistant linings and coatings. The mixed composition can be applied in films ranging from less than 5 mils to more than 150 mils in thickness.

Master Bond Inc. : Low Viscosity, Fast Curing, Two High Performance Optical Epoxy For Bonding, Sealing, Coating & Casting

Mon, 25 Jun 2007 09:26:00 GMT

EP39-2 is very fast curing, even in very thing sections. Films as thin as 5 mil become tack free at ambient temperatures in only 3 hours and fully cure in 6-10 hours.

Master Bond Inc. : Low Viscosity Adhesive for Optics Coating

Mon, 25 Jun 2007 09:23:00 GMT

Polymer System EP30-1, is a low viscosity, two component epoxy compound for high performance fiber optics bonding, coating, potting and encapsulation. EP30-1 is formulated to cure at room temperature or more rapidly at elevated temperatures.

Enecon : ENESEAL CR Provides Unrivaled Corrosion Resistance to Metal and Concrete Surfaces

Wed, 06 Jun 2007 12:27:00 GMT

ENESEAL CR is a single component, water based, liquid coating which dries to a highly durable, corrosion resistant, elastomeric ‘skin’ that provides extraordinary environmental protection to metal and concrete/masonry surfaces. It can also be applied as a top coat over most zinc primers.

Rex-Cut Products Inc. : Unitized Mounted Points Conform to Holes, Contours and Radii

Mon, 04 Jun 2007 08:54:00 GMT

Rex-Cut Megabrite™ Mounted Points are soft, resilient, and conform well to holes, contours, radii, and edges for light deburring, blending, and polishing applications.

Stafford Mfg. Corp. : Weldable Shaft Collars Machined From AISA 1018 Steel

Wed, 16 May 2007 09:34:00 GMT

Stafford Weldable Shaft Collars are available in one- and two-piece styles to let users custom fabricate all types of drive-, motion control-, and structural components. Machined from AISI 1018 steel, they are especially suitable for creating parts such as gears, pinions, king pins, and levers.

Nycoa Corp of America : Highly flexible nylon TPE

Mon, 07 May 2007 11:43:00 GMT

Nycoa 2245 is a highly flexible nylon TPE suitable for extruded profiles including specialty monofilament, tubing, film and sheet. Nycoa 2245 can also be injection molded.

Dow Corning Corp. : MOLYKOTE(r) D-96 ANTI-FRICTION Coating QUIETS AUTO INTERIORS

Thu, 03 May 2007 08:29:00 GMT

Molykote(r) D-96 Anti-Friction Coating from Dow Corning reduces or eliminates noise in automotive interior components, including door panels, arm rests, instrument panels, glove boxes and clips.

Aremco Products Inc. : Zirconium Oxide Filled Refractory Coating

Wed, 04 Apr 2007 10:01:00 GMT

Pyro-Painttm 634-ZO, a new high temperature, zirconium oxide filled refractory coating developed by Aremco Products, Inc., is now used to coat and extend the life of ceramic, graphite and metal crucibles and molds use in foundry applications to 3270 oF (1800 8C).

Aremco Products Inc. : Coating Repairs Corroded Steel in Power Plants

Thu, 26 Apr 2007 12:21:00 GMT

Corr-Painttm CP2000, a new high performance coating developed by Aremco Products, Inc., is now used to repair highly corroded corrugated steel panels found in power plant boilers for operating temperatures to 400 oF (204 ºC).